Spiral Flute 15° Taps
Emkay manufactures spiral fluted taps in 15° to various standards like ISO, DIN, etc. These taps are suitable for blind hole applications for steel of tensile strength ranging from 1000 upto 1300 N/mm2.
Further, we can also make these taps in Powder Metallurgy grade, which can work on steel of tensile strength from 1300 upto 1600 N/mm2 , such as spring steel, hardened wear resistant steel, maraging steel, etc. These taps can also work on chilled cast iron 400-600HB and titanium, commercially pure, and titanium alloys above 730 N/mm2.
We can also provide special geometry 15° spiral fluted taps suitable for making various cast iron components.
SELECTION CHART & STOCK AVAILABILITY
RANGE OF SPIRAL FLUTE 15° TAPS
Standard Series
- HSS-E
- DIN-371, DIN-374, D-376
- ISO-529, ISO-2283
- and JIS Standard
- Coating : TiN/TiCN
VX-Series
- HSS-E (Vanadium)
- DIN-371, DIN-374, D-376
- ISO-529
- Coating : TiN/TiCN
PM Series
- Powder Metallurgy
- DIN-371, DIN-374, D-376
- ISO-2283
- Coating : TiN/TiCN
Special Geometry
- HSS-E and HSS-PM (Powder Metallurgy)
- DIN-371, DIN-374, D-376
- Coating : TiN/TiALN
